Does Brick Acid Clean Quarry Tiles?

  • By: Sam
  • Date: February 22, 2022
  • Time to read: 5 min.

Does Brick Acid Clean Quarry Tiles?

Brick acid is a popular cleaning agent for quarry tiles. It can remove most dirt and stains, but whether or not it actually cleans the tiles is up for debate.

Some claim that brick acid does an excellent job of restoring tiles to their original condition, while others say that it can damage the surface of the tile and cause discoloration.

So, does brick acid clean quarry tiles? The answer is, ‘it depends!’. Brick Acid can clean quarry tiles, but you have to make sure first that you are using the dilute solution and check it on a small portion of quarry tiles to see if any damage there.

How Brick Acid Works

Brick acid is an acidic cleaner that can remove hard water buildup, mineral deposits, and limescale from tile surfaces. It also has the ability to break up soot and grease, making it a useful tool for cleaning dirty grout lines. While brick acid is very effective in removing stains from tiles, its caustic nature can also damage the tiles over time.

What Are The Benefits of Brick Acid for Cleaning Quarry Tiles?

Brick acid has many benefits as a cleaning agent.

  • It’s inexpensive and readily available at any hardware store.
  • One quart of brick acid can usually clean up to 100 square feet of the quarry tile surface.
  • Moreover, because brick acid can remove limescale, mineral deposits, and hard water buildup from the tiles, it will restore them to their former color and brightness.
  • In addition, since brick acid is acidic in nature, it also has the ability to break up soap scum that accumulates around porcelain fixtures in showers and bathtubs. It can also help unclog and clean out clogged drains that have been impeded by soap scum or hair.

Setting the tiles in the sun after cleaning with the solution will ensure that they dry thoroughly and avoid discoloration.

Point To Ponder

Brick acid should not be used on unsealed quarry tiles because of its caustic nature. Since it’s acidic in nature, it can break down the seal of the tiles and cause them to absorb moisture over time.

This can make the tiles more susceptible to stains and discoloration, especially if they are exposed to water. The acid in brick acid can also cause damage to grout over time, which may lead to more serious problems like mold growth and mildew.

Brick Acid Test on Bricks Before Cleaning Them

It’s important that you carry out a few tests on your quarry tiles before using brick acid on them. Use the cleaning solution on a small section of the tiles, then wait for it to dry. Look at this area in different light settings and at different angles to see if there are any noticeable changes in color or glossiness.

If you notice that your tiles have darkened or developed a dull luster after using brick acid, it’s likely that they have been damaged.

However, if you don’t see any changes in color, this doesn’t mean that the tiles are safe to use with brick acid. You should still test your quarry tiles before cleaning them thoroughly because there could be other problems like mortar lines and grout joints breaking apart when you clean them with a caustic solution.

What Are The Disadvantages of Brick Acid For Cleaning Quarry Tiles?

There are a number of disadvantages to using brick acid as a cleaning agent for your tiles.

  • First, it’s important to note that brick acid is very caustic and can burn your skin if you come into direct contact with it. It should never be mixed with other cleaning solutions or chemicals, even if they are water-based.
  • Brick acid should only be used in well-ventilated areas since it gives off harmful fumes that can burn the inside of your nose and throat if you inhale them. Some people have reported being burned by brick acid when using it on their quarry tiles, so extreme care should be taken when using it in your home.
  • In addition, brick acid is an acidic solution that can eat away at the tiles and cause serious damage to them over time. It contains a number of harsh chemicals and acids which are known to give off carcinogenic vapors when heated or mixed with water, so it’s best to stay out of the smoke or fumes that are produced when you use this cleaning agent.

Precautions While Using Brick Acid To Clean Quarry Tiles

It’s important to follow these precautions while using brick acid on your quarry tiles:

  • Wear protective clothing including gloves, safety goggles or glasses, and an air-tight respirator. Once the chemical is on your skin, it reacts with the moisture in it and continues to burn you until there’s no longer any moisture left. This means that the burning sensation may continue even after you’ve washed it off with water.
  • Be careful when using brick acid to clean your tiles since it’s very acidic in nature and can eat away at mortar joints and grout over time if not used sparingly. Even though this cleaning agent is a standard component of commercial cleaners, you should still use caution when exposing your tiles to it.
  • Make sure that you’re mixing brick acid with distilled water to avoid any adverse reactions between the chemical and other liquids. This means that you may need two separate containers of distilled water if you’re using a commercial cleaner that already contains this ingredient, like Bowl & Tile Cleaner.
  • When cleaning your quarry tiles with brick acid, make sure you apply it to a small test area first. Leave the solution on the tile for about an hour before rinsing it off and checking to see if any color changes or glossiness has been removed from your tiles.
  • Rinse off your tiles thoroughly since brick acid can dry out over time, which will cause it to react with moisture in the air and flare up when you’re cleaning. You should also avoid using this chemical on porous surfaces like textured grout lines or soft stones such as travertine.
  • Never mix brick acid with other cleaning solutions or chemicals, even if they are water-based. Mixing the chemical with something else can cause many side effects, including serious burns from touching your skin to it and breathing in noxious fumes from the fumes produced when you mix it with another substance.


In conclusion, we can say that yes we can clean Quarry tiles with Brick Acid but we have to be careful in it as brick acid is caustic in nature and can damage both, the tiles and the hand, but you keep these points provided in this article in your mind you will get this job done easily. If you have any doubt you can easily ask in the comments.

Leave a Reply

Your email address will not be published. Required fields are marked *

Can You Tile over quarry tiles?

Previous Post

Can You Tile over quarry tiles?

Next Post

Can You Paint Quarry Tiles?

Can You Paint Quarry Tiles?